FUEL PRESSURE REGULATOR INSTALLATION


  1. INSTALL FUEL PRESSURE REGULATOR ASSEMBLY


    1. Apply gasoline to 2 new O-rings and then install them to the fuel pressure regulator assembly.

    2. Install the fuel pressure regulator assembly.

  2. INSTALL FUEL PUMP WITH FILTER ASSEMBLY

    Tech Tips

    Perform "Inspection After Repair" after replacing the fuel pump with filter assembly Click here.


    1. A01G5Y0E01
      Text in Illustration
      *1 O-ring
      *2 Fuel Pump Spacer

      Apply gasoline to a new O-ring. Then install the O-ring and fuel pump spacer to the fuel pump with filter assembly.

    2. Engage the 5 claws of the fuel pump with filter assembly.

      Note


      • Make sure that the O-ring is not cut or pinched during installation.

      • Engage the claws securely.

      • Do not remove the suction filter.

    3. A01G7S3

      Engage the 2 claws of the No. 1 fuel suction support.

    4. Connect the fuel pump harness connector.

    5. Engage the 2 claws of the No. 1 fuel suction support and install the fuel filter and the fuel pump with filter assembly onto the fuel sub-tank.

      Note

      Do not apply excessive force to the tube or the No. 1 fuel suction support.

    6. A01G4F6

      Align the groove of the fuel pump filter hose with the cutout of the fuel sub-tank and install the fuel pump filter hose.

    7. Connect the connector of the fuel pump harness.

  3. INSTALL FUEL SENDER GAUGE ASSEMBLY


    1. A01G8PW

      Install the fuel sender gauge assembly by sliding it downward.

    2. Connect the connector of the fuel sender gauge assembly.

    3. Install the 2 wire harness protectors.

      Note

      Do not damage the wire harness.

    4. Connect the 2 wire harness clamps.

      Note

      Do not damage the wire harness.

  4. INSTALL FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY

    Click here