FRONT CRANKSHAFT OIL SEAL REMOVAL


  1. REMOVE FRONT WHEEL RH

  2. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH

  3. REMOVE ENGINE UNDER COVER RH

  4. REMOVE FRONT FENDER APRON SEAL RH

  5. REMOVE V-RIBBED BELT


    1. A01G4G6

      Attach a wrench to the hexagonal portion of the V-ribbed belt tensioner assembly as shown in the illustration, rotate the V-ribbed belt tensioner assembly clockwise, and remove the V-ribbed belt.

  6. REMOVE CRANKSHAFT PULLEY


    1. A01G8PLE01
      Text in Illustration
      *1 Washer
      *a Hold
      *b Turn

      Using SST, hold the crankshaft pulley and loosen the pulley bolt. Further loosen the pulley bolt until 2 or 3 threads are screwed into the crankshaft.

      SST
      09213-54015   ( 09214-00030 )
      09213-70011
      09330-00021

      Tech Tips

      Insert a few washers (thickness: approximately 5 mm (0.197 in.)) between SST(09213-70011) and SST(09214-00030).

    2. A01G4SQE02
      Text in Illustration
      *1 Pulley Bolt
      *a Hold
      *b Turn

      Using SST and the pulley bolt, remove the crankshaft pulley and pulley bolt.

      SST
      09950-50013   ( 09951-05010, 09952-05010, 09953-05020, 09954-05011 )

      Tech Tips

      Apply a lubricant to the threads and end of SST.

  7. REMOVE TIMING CHAIN COVER OIL SEAL


    1. A01G8PIE01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver, pry out the timing chain cover oil seal.

      Note

      Do not damage the surface of the timing chain cover oil seal press fit hole or the crankshaft.

      Tech Tips

      Tape the screwdriver tip before use.