KNOCK SENSOR INSTALLATION


  1. INSTALL KNOCK CONTROL SENSOR


    1. A01G4R0E04
      Text in Illustration
      *a Front of Engine
      *b Up
      *c 7°
      *d 10°

      Install the knock control sensor with the bolt so that the sensor is positioned as shown in the illustration.

      Torque:
      20 N*m  { 204 kgf*cm, 15 ft.*lbf }

      Note

      The acceptable installation angle of the knock control sensor is between 7° upward and 10° downward from the horizontal position.

      Tech Tips

      Perform "Inspection After Repair" after replacing the knock control sensor Click here

    2. Connect the knock control sensor sensor connector.

  2. INSTALL INTAKE MANIFOLD

    Click here