IGNITION COIL AND SPARK PLUG REMOVAL


  1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY


    1. A01G6L6

      Lift the rear of the No. 1 engine cover sub-assembly to detach it from the 2 pins.

    2. Lift the front of the No. 1 engine cover sub-assembly to detach the it from the pin and remove it.

      Note

      Attempting to disengage both front and rear pins at the same time may cause the No. 1 engine cover sub-assembly to break.

  2. REMOVE IGNITION COIL ASSEMBLY


    1. Disconnect the 4 ignition coil assembly connectors.

    2. A01G6KB

      Remove the 4 bolts and 4 ignition coil assemblies.

  3. REMOVE SPARK PLUG


    1. A01G7LS

      Remove the 4 spark plugs.