CRANKSHAFT POSITION SENSOR INSTALLATION


  1. INSTALL CRANKSHAFT POSITION SENSOR


    1. Clean and degrease the threads of the bolt for the crankshaft position sensor.

    2. A01G4DLE07
      Text in Illustration
      *1 O-ring

      Apply a light coat of engine oil to the O-ring of the crankshaft position sensor.

    3. A01G7LYE06
      Text in Illustration
      *1 Adhesive

      Apply adhesive to 2 or 3 threads of the bolt.

      Adhesive
      Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent.

    4. Install the crankshaft position sensor with the bolt.

      Torque:
      6.5 N*m  { 66 kgf*cm, 58 in.*lbf }

      Note

      Make sure that the O-ring is not cracked or moved out of place during installation.

    5. Connect the crankshaft position sensor connector.

  2. INSPECT FOR OIL LEAK