CAMSHAFT POSITION SENSOR INSTALLATION

INSTALL CAMSHAFT POSITION SENSOR

1. Camshaft position sensor (for Intake Side)

   
   

   1. Clean and degrease the threads of the bolt for the camshaft position sensor.

   2. Apply a light coat of engine oil to the O-ring of the camshaft position sensor.

      Note

      Make sure that the O-ring is not cracked or moved out of place during installation.

   3. 

      Text in Illustration

      *1

      Adhesive

      Apply adhesive to 2 or 3 threads of the bolt.

      Adhesive
      Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent.

   4. Install the camshaft position sensor with the bolt.

      Torque:

      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

   5. Connect the camshaft position sensor connector.

2. Camshaft position sensor (for Exhaust Side)

   
   

   1. Clean and degrease the threads of the bolt for the camshaft position sensor.

   2. Apply a light coat of engine oil to the O-ring of the camshaft position sensor.

      Note

      Make sure that the O-ring is not cracked or moved out of place during installation.

   3. 

      Text in Illustration

      *1

      Adhesive

      Apply adhesive to 2 or 3 threads of the bolt.

      Adhesive
      Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent.

   4. Install the camshaft position sensor with the bolt.

      Torque:

      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

   5. Connect the camshaft position sensor connector.

INSPECT FOR OIL LEAK