CAMSHAFT POSITION SENSOR REMOVAL


  1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY


    1. A01G6L6

      Lift the rear of the No. 1 engine cover sub-assembly to detach it from the 2 pins.

    2. Lift the front of the No. 1 engine cover sub-assembly to detach the it from the pin and remove it.

      Note

      Attempting to disengage both front and rear pins at the same time may cause the No. 1 engine cover sub-assembly to break.

  2. REMOVE CAMSHAFT POSITION SENSOR


    1. Camshaft position sensor (for Exhaust Side)


      1. A01G83I

        Disconnect the camshaft position sensor connector.

      2. Remove the bolt and camshaft position sensor.

    2. Camshaft position sensor (for Intake Side)


      1. A01G6UK

        Disconnect the camshaft position sensor connector.

      2. Remove the bolt and camshaft position sensor.