EXHAUST MANIFOLD REMOVAL


  1. REMOVE FRONT WHEEL OPENING EXTENSION PAD LH

  2. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH

  3. REMOVE ENGINE UNDER COVER LH

  4. REMOVE ENGINE UNDER COVER RH

  5. REMOVE FRONT EXHAUST PIPE ASSEMBLY


    1. A01G4AO

      Disconnect the heated oxygen sensor connector.

    2. A01G812

      Remove the 2 bolts, 2 compression springs and 2 nuts.

    3. Remove the front exhaust pipe assembly from the exhaust pipe support.

    4. Remove the 2 gaskets from the exhaust manifold converter sub-assembly and front exhaust pipe assembly.

  6. REMOVE MANIFOLD STAY


    1. A01G4J1

      Remove the bolt, nut and manifold stay.

  7. REMOVE NO. 2 MANIFOLD STAY


    1. A01G59Z

      Remove the bolt, nut and No. 2 manifold stay.

  8. REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR


    1. A01G4OI

      Remove the 4 bolts and No. 1 exhaust manifold heat insulator from the exhaust manifold converter sub-assembly.

  9. REMOVE AIR FUEL RATIO SENSOR


    1. A01G625

      Remove the hose clamp.

    2. Disconnect the air fuel ratio sensor connector.

    3. A01G5B9E01

      Using SST, remove the air fuel ratio sensor from the exhaust manifold.

      SST
      09224-00010

  10. REMOVE EXHAUST MANIFOLD CONVERTER SUB-ASSEMBLY


    1. A01G7NZ

      Remove the 5 nuts and exhaust manifold converter sub-assembly from the cylinder head sub-assembly.

    2. A01G80EE01

      Remove the exhaust manifold to head gasket from the cylinder head sub-assembly.

  11. REMOVE NO. 2 EXHAUST MANIFOLD HEAT INSULATOR


    1. A01G452

      Remove the 2 bolts and No. 2 exhaust manifold heat insulator.

  12. REMOVE NO. 1 MANIFOLD CONVERTER INSULATOR


    1. A01G64B

      Remove the 4 bolts and No. 1 manifold converter insulator.