INTAKE AIR CONTROL VALVE ACTUATOR (for TCV) REMOVAL


  1. REMOVE INTAKE MANIFOLD

    Click here

  2. REMOVE INTAKE AIR CONTROL VALVE ACTUATOR


    1. A01G4AB

      Remove the 2 bolts, intake air control valve actuator and gasket from the intake manifold.

      Note


      • A01G7IU

        Make sure that foreign matter, such as water, oil, sand or iron particles, does not enter the gear chamber or intake air control valve actuator at the locations marked by the circles in the illustration.

      • A01G6X8

        Do not loosen or remove the bolt and 2 nuts shown in the illustration.