WINDSHIELD OUTSIDE MOULDING INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. Click here

   INSTALL WINDSHIELD NO. 3 OUTSIDE MOULDING CLIP

   Tip:

   Perform the following procedure only when replacement of a windshield No. 3 outside moulding clip is necessary.

   
   
   1. 

      Using a riveter with a nose piece, install 5 new windshield No. 3 outside moulding clips.

      Tip:

      If the mandrel of the windshield No. 3 outside moulding clip does not come off on the first operation of the rivet gun, slide the rivet gun forward on the mandrel and operate it again.

      Note:
      

      • 

        Do not pry the windshield No. 3 outside moulding clip with the riveter, as this will cause damage to the riveter and mandrel.

        Table 1. Text in Illustration

        *1	Riveter
        *2	Mandrel
        *a	Incorrect

      • Confirm that the windshield No. 3 outside moulding clips are seated properly against the vehicle body.

      • 

        Do not tilt the riveter when installing the windshield No. 3 outside moulding clip to the vehicle body.

        Table 2. Text in Illustration

        *1	Riveter
        *a	Incorrect

   2. Install the windshield glass.

      (Click here.)

2. Click here

   INSTALL WINDSHIELD NO. 1 OUTSIDE MOULDING CLIP

   Tip:

   Perform the following procedure only when replacement of a windshield No. 1 outside moulding clip is necessary.

   
   
   1. 

      Engage the 5 claws to install 5 new windshield No. 1 outside moulding clips as shown in the illustration.

      Table 3. Text in Illustration

      *1	Windshield No. 1 Outside Moulding Clip
      *2	Windshield No. 3 Outside Moulding Clip

3. Click here

   INSTALL WINDSHIELD OUTSIDE MOULDING

   
   
   1. 

      Engage the guide and 10 claws.

   2. Engage the claw to install the windshield outside moulding.