NAME PLATE INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. Click here

   INSTALL SYMBOL EMBLEM

   
   

   1. Clean the vehicle body surface.

      
      

      1. Using a heat light, heat the vehicle body surface.

      2. Remove any remaining double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

   2. Using a heat light, heat the vehicle body and a new symbol emblem.

   3. Remove the release paper from the symbol emblem.

      Tip:

      After removing the release paper, keep the exposed adhesive free from foreign matter.

   4. 

      Engage the 2 pins and install the symbol emblem as shown in the illustration.

2. Click here

   INSTALL NO. 1 LUGGAGE COMPARTMENT DOOR NAME PLATE

   
   

   1. Clean the vehicle body surface.

      
      

      1. Using a heat light, heat the vehicle body surface.

      2. Remove any remaining double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

   2. Using a heat light, heat the vehicle body and a new No. 1 luggage compartment door name plate.

   3. Remove the release paper from the No. 1 luggage compartment door name plate.

      Tip:

      After removing the release paper, keep the exposed adhesive free from foreign matter.

   4. 

      Install the No. 1 luggage compartment door name plate as shown in the illustration.

      Table 2. Text in Illustration

      *a

      Profile of Luggage Compartment Door Panel

      -

      -

      Reference Measurement
      Area Measurement A 37.1 mm (1.46 in.) B 108.8 mm (4.28 in.) C 41.3 mm (1.63 in.)

3. Click here

   INSTALL NO. 3 LUGGAGE COMPARTMENT DOOR PLATE

   
   

   1. Clean the vehicle body surface.

      
      

      1. Using a heat light, heat the vehicle body surface.

      2. Remove any remaining double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

   2. Using a heat light, heat the vehicle body and a new No. 3 luggage compartment door plate.

   3. Remove the release paper from the No. 3 luggage compartment door plate.

      Tip:

      After removing the release paper, keep the exposed adhesive free from foreign matter.

   4. 

      Install the No. 3 luggage compartment door plate as shown in the illustration.

      Table 3. Text in Illustration

      *a

      Profile of Luggage Compartment Door Panel

      -

      -

      Reference Measurement
      Area Measurement A 41.7 mm (1.64 in.) B 108.8 mm (4.28 in.) C 37.2 mm (1.46 in.)

4. Click here

   INSTALL BODY SIDE NAME PLATE

   
   

   1. Clean the vehicle body surface.

      
      

      1. Using a heat light, heat the vehicle body surface.

      2. Remove any remaining double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

   2. Using a heat light, heat the vehicle body and a new body side name plate.

   3. Remove the release paper from the body side name plate.

      Tip:

      After removing the release paper, keep the exposed adhesive free from foreign matter.

   4. for LH Side:

      
      
      1. 

         Install the body side name plate as shown in the illustration.

         Table 4. Text in Illustration

         *a

         Profile of Rear Door Panel

         -

         -

         Reference Measurement
         Area Measurement A 53.7 mm (2.11 in.) B 100.3 mm (3.95 in.) C 52.7 mm (2.07 in.) D 5.1 mm (0.201 in.)

   5. for RH Side:

      
      
      1. 

         Install the body side name plate as shown in the illustration.

         Table 5. Text in Illustration

         *a

         Profile of Rear Door Panel

         -

         -

         Reference Measurement
         Area Measurement A 37.3 mm (1.47 in.) B 85.8 mm (3.38 in.) C 53.7 mm (2.11 in.) D 5.3 mm (0.209 in.)