VEHICLE APPROACHING SPEAKER INSPECTION

PROCEDURE


  1. INSPECT VEHICLE APPROACHING SPEAKER ASSEMBLY

    A0005F9C25
    *a

    Component without harness connected

    (Vehicle Approaching Speaker Assembly)

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 (+) - 2 (-) Always 6 to 10 Ω

      Tech Tips


      • Make sure that there are no problems such as looseness or play with the installation of the vehicle approaching speaker assembly.

      • Make sure that there are no abnormalities with the vehicle approaching speaker assembly such as the presence of foreign material or tears in the paper of the speaker cone.

      If the result is not as specified, replace the vehicle approaching speaker assembly.