Click here

ROCKER PANEL MOULDING REASSEMBLY

Click here
Click here

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for the LH side and RH side.

  • The following procedure is for the LH side.

Click here

PROCEDURE


  1. Click here

    INSTALL NO. 6 ROCKER PANEL MOULDING PROTECTOR


    1. for Front Side:


      1. Wipe off any tape adhesive residue with cleaner.

      2. A01W403

        Install a new No. 6 rocker panel moulding protector as shown in the illustration.

        Tip:

        Attach the new No. 6 rocker panel moulding protector to the line marked on the rocker panel moulding.

    2. for Rear Side:


      1. Wipe off any tape adhesive residue with cleaner.

      2. A01W016

        Install a new No. 6 rocker panel moulding protector as shown in the illustration.

        Tip:

        Attach the new No. 6 rocker panel moulding protector to the line marked on the rocker panel moulding.

  2. Click here

    INSTALL NO. 3 ROCKER PANEL MOULDING PROTECTOR


    1. Wipe off any tape adhesive residue with cleaner.

    2. A01W0G2E04

      Install 3 new No. 3 rocker panel moulding protectors so they are centered within the markings on the rocker panel molding assembly.

      Table 1. Text in Illustration
      *a Marking - -