ROCKER PANEL MOULDING REMOVAL

CAUTION / NOTICE / HINT

PROCEDURE

1. Click here

   REMOVE NO. 2 ROCKER PANEL MOULDING PROTECTOR

   Click here

2. Click here

   REMOVE ROCKER PANEL MOULDING ASSEMBLY

   
   
   1. 

      Put protective tape around the rocker panel moulding assembly and door.

      Table 1. Text in Illustration

      *1

      Protective Tape

      -

      -

   2. 

      Using a 4 mm hexagon wrench, remove the 2 hexagon screws and grommet.

   3. Remove the screw.

   4. 

      Using a 4 mm hexagon wrench, remove the 2 hexagon screws and grommet.

   5. 

      Disengage the 2 claws and remove the rocker panel moulding cover.

      Tip:

      Use the same procedure for the front side and rear side.

   6. 

      Remove the 2 screws.

   7. Remove the 7 clips.

   8. 

      Disengage the 9 clips and remove the rocker panel moulding assembly.

   9. Remove the 9 clips from the rocker panel moulding assembly.