ROCKER PANEL MOULDING REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the LH side and RH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. REMOVE NO. 2 ROCKER PANEL MOULDING PROTECTOR

    Click here

  2. REMOVE ROCKER PANEL MOULDING ASSEMBLY


    1. Put protective tape around the rocker panel moulding assembly and door.

      A01W51WE04
      Text in Illustration
      *1 Protective Tape - -
    2. A01W26Q

      Using a 4 mm hexagon wrench, remove the 2 hexagon screws and grommet.

    3. Remove the screw.

    4. A01W4B0

      Using a 4 mm hexagon wrench, remove the 2 hexagon screws and grommet.

    5. A01W3Y7

      Disengage the 2 claws and remove the rocker panel moulding cover.

      Tech Tips

      Use the same procedure for the front side and rear side.

    6. A01W2AD

      Remove the 2 screws.

    7. Remove the 7 clips.

    8. A01VZRY

      Disengage the 9 clips and remove the rocker panel moulding assembly.

    9. Remove the 9 clips from the rocker panel moulding assembly.