HORN INSPECTION

Info Added 2017-08-02

PROCEDURE


  1. INSPECT HIGH PITCHED HORN ASSEMBLY (w/ Navigation System or w/o Navigation System for 8 Speakers)


    1. B001VGOE01
      Text in Illustration
      *a

      Component without harness connected

      (High Pitched Horn Assembly)

      Apply an auxiliary battery voltage and check the operation of the horn according to the table below.

      OK
      Measurement Condition Specified Condition

      Auxiliary battery positive (+) → Terminal A4-1

      Auxiliary battery negative (-) → Body ground

      		 Horn sounds

      If the result is not as specified, replace the high pitched horn assembly.

  2. INSPECT LOW PITCHED HORN ASSEMBLY (w/ Navigation System or w/o Navigation System for 8 Speakers)


    1. B001VBQE01
      Text in Illustration
      *a

      Component without harness connected

      (Low Pitched Horn Assembly)

      Apply an auxiliary battery voltage and check the operation of the horn according to the table below.

      OK
      Measurement Condition Specified Condition

      Auxiliary battery positive (+) → Terminal A1-1

      Auxiliary battery negative (-) → Body ground

      		 Horn sounds

      If the result is not as specified, replace the low pitched horn assembly.

  3. INSPECT HIGH PITCHED HORN ASSEMBLY (w/o Navigation System except 8 Speakers)


    1. B001VEQE01
      Text in Illustration
      *a

      Component without harness connected

      (High Pitched Horn Assembly)

      Apply an auxiliary battery voltage and check the operation of the horn according to the table below.

      OK
      Measurement Condition Specified Condition

      Auxiliary battery positive (+) → Terminal A4-1

      Auxiliary battery negative (-) → Body ground

      		 Horn sounds

      If the result is not as specified, replace the high pitched horn assembly.

  4. INSPECT LOW PITCHED HORN ASSEMBLY (w/o Navigation System except 8 Speakers)


    1. B001VDVE01
      Text in Illustration
      *a

      Component without harness connected

      (Low Pitched Horn Assembly)

      Apply an auxiliary battery voltage and check the operation of the horn according to the table below.

      OK
      Measurement Condition Specified Condition

      Auxiliary battery positive (+) → Terminal A1-1

      Auxiliary battery negative (-) → Body ground

      		 Horn sounds

      If the result is not as specified, replace the low pitched horn assembly.