HEADLIGHT LEVELING ECU INSTALLATION

Click here

PROCEDURE

1. Click here

   INSTALL HEADLIGHT LEVELING ECU (HEADLIGHT SWIVEL ECU ASSEMBLY)

   
   

   1. Install the headlight leveling ECU (headlight swivel ECU assembly) with the bolt.

      8.0 N*m

      82 kgf*cm

      71 in.*lbf

   2. Engage the clamp.

   3. Connect the connector.

2. Click here

   INSTALL ECU INTEGRATION BOX RH (for RHD)

   Click here

3. Click here

   INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY (for RHD)

   Click here

4. Click here

   INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

   Click here

5. Click here

   CONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

   Click here

6. Click here

   INSTALL INSTRUMENT SIDE PANEL

   Click here

7. Click here

   INSTALL FRONT DOOR OPENING TRIM COVER

   Click here

8. Click here

   INSTALL COWL SIDE TRIM BOARD

   Click here

9. Click here

   INSTALL FRONT DOOR SCUFF PLATE

   Click here

10. Click here

    INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL

    Click here

11. Click here

    CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL (for RHD)

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

12. Click here

    INSTALL LUGGAGE TRIM SERVICE HOLE COVER (for RHD)

    Click here

13. Click here

    INSPECT SRS WARNING LIGHT (for RHD)

    (Click here)

14. Click here

    INITIALIZE HEIGHT CONTROL SENSOR SIGNAL

    (Click here)

15. Click here

    ADJUST HEADLIGHT AIMING

    (Click here)