HEADLIGHT LEVELING ECU INSTALLATION

PROCEDURE

1. INSTALL HEADLIGHT LEVELING ECU ASSEMBLY

   
   

   1. Install the headlight leveling ECU assembly with the bolt.

      Torque:

      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

   2. Engage the clamp.

   3. Connect the connector.

2. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

   Click here

3. CONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

   Click here

4. INSTALL INSTRUMENT SIDE PANEL LH

   Click here

5. INSTALL FRONT DOOR OPENING TRIM COVER LH

   Click here

6. INSTALL COWL SIDE TRIM BOARD LH

   Click here

7. INSTALL FRONT DOOR SCUFF PLATE LH

   Click here

8. INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL

   Click here

9. INITIALIZE HEIGHT CONTROL SENSOR SIGNAL

   Click here

10. ADJUST HEADLIGHT AIMING

    Click here