HEIGHT CONTROL SENSOR INSTALLATION

Click here

PROCEDURE

1. Click here

   INSTALL REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY

   
   

   1. Install the rear height control sensor sub-assembly with the 2 bolts and nut.

      Bolt
      8.0 N*m	82 kgf*cm	71 in.*lbf
      Nut
      5.4 N*m	55 kgf*cm	48 in.*lbf

   2. Connect the connector.

   3. Engage the clamp.

2. Click here

   CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

   Note:

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

3. Click here

   INSTALL LUGGAGE TRIM SERVICE HOLE COVER

   Click here

4. Click here

   INITIALIZE HEIGHT CONTROL SENSOR SIGNAL

   (Click here)

5. Click here

   ADJUST HEADLIGHT AIMING

   (Click here)