HEIGHT CONTROL SENSOR INSTALLATION

PROCEDURE

1. INSTALL REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY

   
   

   1. Install the rear height control sensor sub-assembly with the 2 bolts and nut.

      Torque:

      Bolt

      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

      Nut

      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

   2. Connect the connector.

   3. Engage the clamp.

2. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

3. INSTALL LUGGAGE TRIM SERVICE HOLE COVER

   Click here

4. INITIALIZE HEIGHT CONTROL SENSOR SIGNAL

   Click here

5. ADJUST HEADLIGHT AIMING

   Click here