Click here

HEIGHT CONTROL SENSOR REMOVAL

Click here
Click here

PROCEDURE


  1. Click here

    PRECAUTION

    Note:

    After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work (Click here).

  2. Click here

    REMOVE LUGGAGE TRIM SERVICE HOLE COVER

    Click here

  3. Click here

    DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

  4. Click here

    REMOVE REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY


    1. A00090R

      Disengage the clamp.

    2. Disconnect the connector.

    3. Remove the 2 bolts and nut, and rear height control sensor sub-assembly.

      Note:

      Do not drop the rear height control sensor sub-assembly. If it is dropped, replace it with a new one.