HAZARD WARNING SWITCH INSTALLATION

Click here

PROCEDURE

1. Click here

   INSTALL RADIO RECEIVER ASSEMBLY (HAZARD SWITCH) (w/o Navigation System)

2. Click here

   INSTALL NO. 2 RADIO BRACKET (w/o Navigation System)

   Click here

3. Click here

   INSTALL NO. 1 RADIO BRACKET (w/o Navigation System)

   Click here

4. Click here

   INSTALL MULTI-MEDIA MODULE RECEIVER ASSEMBLY (HAZARD SWITCH) (w/ Navigation System)

5. Click here

   INSTALL HARD DISK DRIVE (w/ Navigation System)

   Click here

6. Click here

   INSTALL NO. 2 RADIO BRACKET (w/ Navigation System)

   Click here

7. Click here

   INSTALL NO. 1 RADIO BRACKET (w/ Navigation System)

   Click here

8. Click here

   INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET (w/o Navigation System)

   Click here

9. Click here

   INSTALL MULTI-MEDIA MODULE RECEIVER ASSEMBLY WITH BRACKET (w/ Navigation System)

   Click here

10. Click here

    INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL

    Click here

11. Click here

    INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY

    Click here

12. Click here

    INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL GARNISH

    Click here

13. Click here

    INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

    Click here

14. Click here

    CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL (w/ Navigation System)

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

15. Click here

    INSTALL LUGGAGE TRIM SERVICE HOLE COVER (w/ Navigation System)

    Click here

16. Click here

    INSPECT HARD DISK DRIVE (w/ Navigation System)

    (Click here)

17. Click here

    PERFORM FOR MULTI-MEDIA MODULE RECEIVER ASSEMBLY INITIALIZATION (w/ Parking Assist Monitor System)

    Tip:

    When replacing the multi-media module receiver assembly, perform parking assist monitor system initialization (Click here).

18. Click here

    CUSTOMIZE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM

    Click here