REAR COMBINATION LIGHT ASSEMBLY INSPECTION

PROCEDURE

1. Click here

   INSPECT REAR COMBINATION LIGHT LENS AND BODY LH

   
   

   1. Remove the rear combination light lens and body LH.

   2. 

      Apply auxiliary battery voltage to the rear combination light lens and body LH and check that the lights come on.

      OK
      Condition Specified Condition Auxiliary battery positive (+) → Terminal 1 Auxiliary battery negative (-) → Terminal 2 The stop light comes on Auxiliary battery positive (+) → Terminal 3 Auxiliary battery negative (-) → Terminal 2 The taillight comes on

      Table 1. Text in Illustration

      *a	Component without harness connected (Rear Combination Light Lens and Body LH)

      If the result is not as specified, repair or replace the rear combination light lens and body LH.

2. Click here

   INSPECT REAR COMBINATION LIGHT LENS AND BODY RH

   
   

   1. Remove the rear combination light lens and body RH.

   2. 

      Apply auxiliary battery voltage to the rear combination light lens and body RH and check that the lights come on.

      OK
      Condition Specified Condition Auxiliary battery positive (+) → Terminal 1 Auxiliary battery negative (-) → Terminal 2 The stop light comes on Auxiliary battery positive (+) → Terminal 3 Auxiliary battery negative (-) → Terminal 2 The taillight comes on

      Table 2. Text in Illustration

      *a	Component without harness connected (Rear Combination Light Lens and Body RH)

      If the result is not as specified, repair or replace the rear combination light lens and body RH.

3. Click here

   INSPECT REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY LH

   
   

   1. Reconnect the rear combination light socket and wire sub-assembly LH to the rear combination light lens and body LH.

   2. 

      Apply auxiliary battery voltage to the rear combination light socket and wire sub-assembly LH and check that the lights come on.

      OK

      Condition Specified Condition Auxiliary battery positive (+) → Terminal 1 (STP) Auxiliary battery negative (-) → Terminal 6 (E) The stop light comes on Auxiliary battery positive (+) → Terminal 2 (TL) Auxiliary battery negative (-) → Terminal 6 (E) The taillight comes on Auxiliary battery positive (+) → Terminal 5 (TRN) Auxiliary battery negative (-) → Terminal 6 (E) The turn signal light comes on

      Table 3. Text in Illustration

      *a	Component without harness connected (Rear Combination Light Socket and Wire Sub-assembly LH)

      If the result is not as specified, repair or replace the rear combination light socket and wire sub-assembly LH.

4. Click here

   INSPECT REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY RH

   
   

   1. Reconnect the rear combination light socket and wire sub-assembly RH to the rear combination light lens and body RH.

   2. 

      Apply auxiliary battery voltage to the rear combination light socket and wire sub-assembly RH and check that the lights come on.

      OK

      Condition Specified Condition Auxiliary battery positive (+) → Terminal 1 (STP) Auxiliary battery negative (-) → Terminal 6 (E) The stop light comes on Auxiliary battery positive (+) → Terminal 2 (TL) Auxiliary battery negative (-) → Terminal 6 (E) The taillight comes on Auxiliary battery positive (+) → Terminal 5 (TRN) Auxiliary battery negative (-) → Terminal 6 (E) The turn signal light comes on

      Table 4. Text in Illustration

      *a	Component without harness connected (Rear Combination Light Socket and Wire Sub-assembly RH)

      If the result is not as specified, repair or replace the rear combination light socket and wire sub-assembly RH.