AUTOMATIC HIGH BEAM MAIN SWITCH REMOVAL

PROCEDURE

1. REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL

   Click here

2. REMOVE FRONT DOOR SCUFF PLATE LH

   Click here

3. REMOVE COWL SIDE TRIM BOARD LH

   Click here

4. REMOVE FRONT DOOR OPENING TRIM COVER LH

   Click here

5. REMOVE INSTRUMENT SIDE PANEL LH

   Click here

6. DISCONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

   Click here

7. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

   Click here

8. REMOVE AUTO HIGH BEAM SWITCH

   
   

   1. 

      Disengage the 2 claws and remove the auto high beam switch.