HAZARD WARNING SWITCH INSTALLATION

PROCEDURE

1. INSTALL RADIO RECEIVER ASSEMBLY (HAZARD SWITCH) (w/o Navigation System)

2. INSTALL NO. 2 RADIO BRACKET (w/o Navigation System)

   Click here

3. INSTALL NO. 1 RADIO BRACKET (w/o Navigation System)

   Click here

4. INSTALL MULTI-MEDIA MODULE RECEIVER ASSEMBLY (HAZARD SWITCH) (w/ Navigation System)

5. INSTALL HARD DISK DRIVE (w/ Navigation System)

   w/ G-BOOK System: Click here

6. INSTALL NO. 2 RADIO BRACKET (w/ Navigation System)

   Click here

7. INSTALL NO. 1 RADIO BRACKET (w/ Navigation System)

   Click here

8. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET (w/o Navigation System)

   Click here

9. INSTALL MULTI-MEDIA MODULE RECEIVER ASSEMBLY WITH BRACKET (w/ Navigation System)

   Click here

10. INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL

    Click here

11. INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY

    Click here

12. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL GARNISH

    Click here

13. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

    Click here

14. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL (w/ Navigation System)

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

15. INSTALL LUGGAGE TRIM SERVICE HOLE COVER (w/ Navigation System)

    Click here

16. INSPECT HARD DISK DRIVE (w/ Navigation System)

    Click here

17. PERFORM FOR MULTI-MEDIA MODULE RECEIVER ASSEMBLY INITIALIZATION (w/ Parking Assist Monitor System)

    w/ Parallel Parking Assist Function: Click here

    w/o Parallel Parking Assist Function: Click here

18. CUSTOMIZE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM (for Power Tilt and Power Telescopic Steering Column)

    Click here