Click here

HIGH INTENSITY DISCHARGE HEADLIGHT BULB INSTALLATION

Click here
Click here

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.

Click here

PROCEDURE


  1. Click here

    INSTALL DISCHARGE HEADLIGHT BULB

    Click here

  2. Click here

    INSTALL NO. 1 HEADLIGHT COVER


    1. A0008GGE02

      Turn the No. 1 headlight cover in the direction indicated by the arrow shown in the illustration until the lock marks are aligned to install it.

      Table 1. Text in Illustration
      *1 Lock Mark
      Note:

      • To prevent incomplete installation, make sure to fully push in and turn the No. 1 headlight cover until the lock marks are aligned.

      • Do not apply excessive force using a tool.

  3. Click here

    CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

  4. Click here

    INSTALL LUGGAGE TRIM SERVICE HOLE COVER

    Click here