HIGH INTENSITY DISCHARGE HEADLIGHT BULB INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.

PROCEDURE


  1. INSTALL DISCHARGE HEADLIGHT BULB

    Click here

  2. INSTALL NO. 1 HEADLIGHT COVER


    1. A0008GGE02
      Text in Illustration
      *1 Lock Mark

      Turn the No. 1 headlight cover in the direction indicated by the arrow shown in the illustration until the lock marks are aligned to install it.

      Note


      • To prevent incomplete installation, make sure to fully push in and turn the No. 1 headlight cover until the lock marks are aligned.

      • Do not apply excessive force using a tool.

  3. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. INSTALL LUGGAGE TRIM SERVICE HOLE COVER

    Click here