HEADLIGHT ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. INSTALL HEADLIGHT ASSEMBLY


    1. Connect each connector.

    2. Install the headlight assembly with the 3 screws and bolt.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

  2. INSTALL FRONT FENDER UPPER PROTECTOR


    1. Engage the 2 guides.

    2. Engage the 4 clips to install the front fender upper protector.

  3. INSTALL FRONT BUMPER ASSEMBLY

    Click here

  4. ADJUST HEADLIGHT AIMING

    Click here

  5. ADJUST FOG LIGHT AIMING

    Click here