HEADLIGHT ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.

PROCEDURE


  1. INSTALL HEADLIGHT ASSEMBLY


    1. Connect the 3 connectors.

    2. Install the headlight assembly with the 3 screws and bolt.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

  2. INSTALL FRONT FENDER UPPER PROTECTOR


    1. Engage the 2 guides.

    2. Engage the 4 clips to install the front fender upper protector.

  3. INSTALL FRONT BUMPER ASSEMBLY

    Click here

  4. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  5. INSTALL LUGGAGE TRIM SERVICE HOLE COVER

    Click here

  6. ADJUST HEADLIGHT AIMING

    Click here

  7. ADJUST FOG LIGHT AIMING

    Click here