REAR COMBINATION LIGHT ASSEMBLY DISASSEMBLY

PROCEDURE


  1. REMOVE REAR BUMPER UPPER RETAINER


    1. A0004EF

      Disengage the 2 guides and remove the rear bumper upper retainer.

  2. REMOVE REAR TURN SIGNAL LIGHT BULB


    1. A0007Y4

      Turn the rear combination light socket and wire sub-assembly with the rear turn signal light bulb in the direction indicated by the arrow shown in the illustration, and remove them as a unit.

    2. Remove the rear turn signal light bulb from the rear combination light socket and wire sub-assembly.

  3. REMOVE REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY


    1. A000844

      Disconnect the connector and remove the rear combination light socket and wire sub-assembly.

  4. REMOVE REAR COMBINATION LIGHT GASKET


    1. A00073W

      Remove the rear combination light gasket.

      Note


      • Be sure to remove all the traces of the old gasket from the body.

      • Do not reuse the removed gasket. Be sure to install a new rear combination light gasket to prevent water ingress.