HEADLIGHT ASSEMBLY REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.

PROCEDURE


  1. PRECAUTION (for HID Headlight)

    Click here

    Note

    After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work Click here.

  2. REMOVE LUGGAGE TRIM SERVICE HOLE COVER (for HID Headlight)

    Click here

  3. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL (for HID Headlight)

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. REMOVE FRONT BUMPER ASSEMBLY

    Click here

  5. REMOVE FRONT FENDER UPPER PROTECTOR


    1. A0006XE

      Disengage the 4 clips.

    2. Disengage the 2 guides and remove the front fender upper protector.

  6. REMOVE HEADLIGHT ASSEMBLY


    1. A0007U7E02
      Text in Illustration
      *1 Bolt
      *2 Screw

      Remove the 3 screws and bolt.

    2. A000517

      Disconnect the 3 connectors and remove the headlight assembly.