Click here

HEADLIGHT ASSEMBLY REMOVAL

Click here
Click here

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.

Click here

PROCEDURE


  1. Click here

    PRECAUTION

    (Click here)

    Note:

    After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work (Click here).

  2. Click here

    REMOVE LUGGAGE TRIM SERVICE HOLE COVER

    Click here

  3. Click here

    DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

  4. Click here

    REMOVE FRONT BUMPER ASSEMBLY

    (Click here)

  5. Click here

    REMOVE FRONT FENDER UPPER PROTECTOR


    1. A0006XE

      Disengage the 4 clips.

    2. Disengage the 2 guides and remove the front fender upper protector.

  6. Click here

    REMOVE HEADLIGHT ASSEMBLY


    1. A0007U7E02

      Remove the 3 screws and bolt.

      Table 1. Text in Illustration
      *1 Bolt
      *2 Screw
    2. A000517

      Disconnect the 3 connectors and remove the headlight assembly.