Info Added 2017-08-02
| DTC Code | DTC Name |
|---|---|
| B124B | Automatic High Beam System |
DESCRIPTION
This DTC is stored when the main body ECU (multiplex network body ECU) detects malfunctions in the automatic high beam system.
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| B124B | Malfunction in automatic high beam system |
|
WIRING DIAGRAM
| *1 | Forward Recognition Camera |
| *2 | Main Body ECU (Multiplex Network Body ECU) |
| *3 | CAN Communication Line |
CAUTION / NOTICE / HINT
Note
Confirm that there are no CAN communication malfunctions before performing the following inspection Click here.
If the main body ECU (multiplex network body ECU) is replaced, refer to Service Bulletin.
Tech Tips
If the forward recognition camera stores a DTC for a malfunction of any of the following, this DTC will be stored simultaneously.
Vehicle speed sensor
Yaw rate and acceleration sensor
Steering angle sensor
CAN communication system
PROCEDURE
CHECK FOR DTC (HEALTH CHECK)
Connect the Techstream to the DLC3.
Turn the power switch on (IG).
Turn the Techstream on.
Enter the following menus: System Select / Health Check.
Check for DTCs.
| Result | ||||||
|---|---|---|---|---|---|---|
|
| B |
|
GO TO OTHER DTC CHART |
| A |
|
CHECK FRONT RECOGNITION CAMERA SYSTEM
Check if a dynamic radar cruise control system, lane departure alert system or pre-crash safety system warning message is displayed on the multi-information display.
| OK |
|---|
| No dynamic radar cruise control system, lane departure alert system and pre-crash safety system warning messages are displayed. |
| OK |
|
REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) Click here |
| NG |
|
GO TO FORWARD RECOGNITION CAMERA Click here |