Click here

WASHER MOTOR INSTALLATION

Click here
Click here

PROCEDURE


  1. Click here

    INSTALL WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY


    1. A01W0D0

      Install the windshield washer motor and pump assembly.

    2. Connect the connector.

    3. A01W4OM

      Connect the washer hose.

  2. Click here

    ADD WASHER FLUID


    1. Add washer fluid to the washer jar.

  3. Click here

    INSTALL FRONT FENDER LINER RH


    1. Install the front fender liner RH with 2 new grommets.

    2. Using a 4 mm hexagon wrench, install the 3 hexagon screws.

    3. Install the 6 clips.

    4. Install the 4 screws and bolt.

    5. A01W4WHE01

      Install the pin hold clip as shown in the illustration.

      Table 1. Text in Illustration
      *a Correct
      *b Incorrect
      Note:

      Insert the pin hold clip with the slot aligned vertically. Do not rotate the clip after inserting it. After installation, confirm that the slot is aligned vertically.

  4. Click here

    INSTALL FRONT WHEEL OPENING EXTENSION PAD RH


    1. Install the front wheel opening extension pad RH with the 3 screws.

  5. Click here

    INSTALL FRONT WHEEL RH

    Click here