WIPER SWITCH INSTALLATION

PROCEDURE

1. Click here

   INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY

   
   
   1. 

      Engage the claw to install the windshield wiper switch assembly as shown in the illustration.

   2. Connect each connector.

2. Click here

   INSTALL UPPER STEERING COLUMN COVER

   
   

   1. Engage the 2 claws to install the upper steering column cover.

   2. Engage the 4 clips and 2 guides to install the instrument cluster finish panel to the upper steering column cover.

3. Click here

   INSTALL LOWER STEERING COLUMN COVER

   
   

   1. Engage the 2 claws.

   2. install the screw.

      2.0 N*m

      20 kgf*cm

      18 in.*lbf

   3. Turn the steering wheel assembly to the left and install the screw.

      2.0 N*m

      20 kgf*cm

      18 in.*lbf

   4. Turn the steering wheel assembly to the right and install the lower steering column cover with the screw.

      2.0 N*m

      20 kgf*cm

      18 in.*lbf

4. Click here

   CONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

   Note:
   

   • Reset the auto tilt away function setting to the previous condition by changing the customize parameter (Click here).

   • When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

5. Click here

   INSTALL LUGGAGE TRIM SERVICE HOLE COVER

   Click here