WIPER AND WASHER SYSTEM HOW TO PROCEED WITH TROUBLESHOOTING

CAUTION / NOTICE / HINT

PROCEDURE

1. Click here

   VEHICLE BROUGHT TO WORKSHOP

   Result
   Proceed to NEXT

   
   
   • NEXTClick here
2. Click here

   CUSTOMER PROBLEM ANALYSIS AND SYMPTOM CHECK

   Result
   Proceed to NEXT

   
   
   • NEXTClick here
3. Click here

   INSPECT AUXILIARY BATTERY VOLTAGE

   
   

   1. Measure the auxiliary battery voltage with the power switch off.

      Standard Voltage
      11 to 14 V (IG OFF)

      If the voltage is below 11 V, recharge or replace the auxiliary battery before proceeding to the next step.

      Result
      Proceed to NEXT

   
   
   • NEXTClick here
4. Click here

   PROBLEM SYMPTOMS TABLE

   Result
   Result Proceed to Fault is not listed in problem symptoms table A Fault is listed in problem symptom stable B

   
   
   • AClick here
   • BClick here

     GO TO STEP 6

5. Click here

   OVERALL ANALYSIS AND TROUBLESHOOTING

   
   

   1. Terminals of ECU (Click here)

   2. Inspection

   3. On-vehicle inspection

      Result
      Proceed to NEXT

   
   
   • NEXTClick here
6. Click here

   ADJUST, REPAIR OR REPLACE

   Result
   Proceed to NEXT

   
   
   • NEXTClick here
7. Click here

   CONFIRMATION TEST

   Result
   Proceed to NEXT

   
   
   • NEXT

     END