OUTER MIRROR CONTROL ECU INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. Click here

   INSTALL OUTER MIRROR CONTROL ECU ASSEMBLY

   
   

   1. Install the outer mirror control ECU assembly with the 2 screws.

   2. Connect the 2 connectors.

2. Click here

   INSTALL FRONT DOOR INNER GLASS WEATHERSTRIP

   Click here

3. Click here

   INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY

   Click here

4. Click here

   INSTALL FRONT DOOR NO. 1 STIFFENER CUSHION

   Click here

5. Click here

   INSTALL COURTESY LIGHT ASSEMBLY

   Click here

6. Click here

   INSTALL DOOR PULL HANDLE COVER

   Click here

7. Click here

   INSTALL MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver Side)

   Click here

8. Click here

   INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger Side)

   Click here

9. Click here

   INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG

   Click here

10. Click here

    CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

11. Click here

    INSTALL LUGGAGE TRIM SERVICE HOLE COVER

    Click here

12. Click here

    INITIALIZE POWER WINDOW CONTROL SYSTEM

    (Click here)

13. Click here

    INSPECT POWER WINDOW OPERATION

    (Click here)