OUTER MIRROR SWITCH INSPECTION

PROCEDURE

1. Click here

   INSPECT OUTER MIRROR SWITCH ASSEMBLY (w/ Memory)

   
   
   1. 

      Check the switch functions.

      
      

      1. Measure the resistance according to the value(s) in the table below.

         Standard Resistance

         Tester Connection Condition Specified Condition 16 (M+) - 14 (E) Mirror adjust switch pressed up 90 to 110 Ω Mirror adjust switch pressed down 437 to 503 Ω Mirror adjust switch pressed left 744 to 856 Ω Mirror adjust switch pressed right 225 to 275 Ω Mirror adjust switch not pressed 10 kΩ or higher 13 (MSW) - 14 (E) Mirror select switch R Below 1 Ω Mirror select switch L 90 to 110 Ω Mirror select switch off 10 kΩ or higher

         Table 1. Text in Illustration

         *1	Mirror Adjust Switch
         *2	Mirror Select Switch
         *a	Component without harness connected (Outer Mirror Switch Assembly)

         If the result is not as specified, replace the outer mirror switch assembly.

   2. Check the LED illuminates.

      
      
      1. 

         Apply auxiliary battery voltage to the outer mirror switch assembly and check that the LED illuminates.

         Standard
         Measurement Condition Specified Condition Auxiliary battery positive (+) → Terminal 23 (ILL+) Auxiliary battery negative (-) → Terminal 24 (ILL-) LED illuminates

         Table 2. Text in Illustration

         *a	Component without harness connected (Outer Mirror Switch Assembly)

         If the result is not as specified, replace the outer mirror switch assembly.

2. Click here

   INSPECT OUTER MIRROR SWITCH ASSEMBLY (w/o Memory)

   
   

   1. Check the mirror select switch and mirror surface adjust switch.

      
      
      1. 

         Turn the mirror select switch to the L position.

      2. Measure the resistance according to the value(s) in the table below.

         Standard Resistance (for left side)
         Tester Connection Condition Specified Condition 9 (VL) - 11 (B) 6 (M+) - 12 (E) UP Below 1 Ω OFF 10 kΩ or higher 9 (VL) - 12 (E) 6 (M+) - 11 (B) DOWN Below 1 Ω OFF 10 kΩ or higher 10 (HL) - 11 (B) 6 (M+) - 12 (E) LEFT Below 1 Ω OFF 10 kΩ or higher 10 (HL) - 12 (E) 6 (M+) - 11 (B) RIGHT Below 1 Ω OFF 10 kΩ or higher

      3. Turn the mirror select switch to the R position.

      4. Measure the resistance according to the value(s) in the table below.

         Standard Resistance (for right side)
         Tester Connection Condition Specified Condition 8 (VR) - 11 (B) 6 (M+) - 12 (E) UP Below 1 Ω OFF 10 kΩ or higher 8 (VR) - 12 (E) 6 (M+) - 11 (B) DOWN Below 1 Ω OFF 10 kΩ or higher 7 (HR) - 11 (B) 6 (M+) - 12 (E) LEFT Below 1 Ω OFF 10 kΩ or higher 7 (HR) - 12 (E) 6 (M+) - 11 (B) RIGHT Below 1 Ω OFF 10 kΩ or higher

         Table 3. Text in Illustration

         *1	Mirror select switch
         *2	Mirror surface adjust switch
         *a	Component without harness connected (Outer Mirror Switch Assembly)

         If the result is not as specified, replace the outer mirror switch assembly.

   2. Check the mirror retract switch.

      
      
      1. 

         Measure the resistance according to the value(s) in the table below.

         Standard Resistance
         Tester Connection Condition Specified Condition 14 (MF) - 12 (E) Mirror retract switch retract position Below 1 Ω 13 (MR) - 11 (B) Below 1 Ω 14 (MF) - 11 (B) Mirror retract switch return position Below 1 Ω 13 (MR) - 12 (E) Below 1 Ω

         Table 4. Text in Illustration

         *1	Mirror retract switch
         *a	Component without harness connected (Outer Mirror Switch Assembly)

         If the result is not as specified, replace the outer mirror switch assembly.

   3. Check the LED illuminates.

      
      
      1. 

         Apply auxiliary battery voltage to the outer mirror switch assembly and check that the LED illuminates.

         Standard
         Measurement Condition Specified Condition Auxiliary battery positive (+) → Terminal 15 (ILL+) Auxiliary battery negative (-) → Terminal 16 (ILL-) LED illuminates

         Table 5. Text in Illustration

         *a	Component without harness connected (Outer Mirror Switch Assembly)

         If the result is not as specified, replace the outer mirror switch assembly.

3. Click here

   INSPECT RETRACTABLE OUTER MIRROR SWITCH

   
   
   1. 

      Check that the switch functions.

      
      

      1. Measure the resistance according to the value(s) in the table below.

         Standard Resistance
         Tester Connection Condition Specified Condition 3 (MAT) - 4 (E) AUTO position Below 1 Ω Except AUTO position 10 kΩ or higher 2 (MR) - 4 (E) Retract position Below 1 Ω Except retract position 10 kΩ or higher

         Table 6. Text in Illustration

         *a	Component without harness connected (Retractable Outer Mirror Switch)

         If the result is not as specified, replace the outer mirror retractable switch.

   2. 

      Check that the LED illuminates.

      
      

      1. Apply auxiliary battery voltage to the retractable outer mirror switch and check that the LED illuminates.

         Measurement Condition Specified Condition Auxiliary battery positive (+) → 5 (ILL+) Auxiliary battery negative (-) → 1 (ILL-) LED illuminates

         Table 7. Text in Illustration

         *a	Component without harness connected (Retractable Outer Mirror Switch)

         If the result is not as specified, replace the retractable outer mirror switch.