OUTER REAR VIEW MIRROR INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the LH side and RH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. INSTALL OUTER REAR VIEW MIRROR ASSEMBLY


    1. Engage the clamp to temporarily install the outer rear view mirror assembly.

    2. Install the outer rear view mirror assembly with the 3 nuts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

  2. INSTALL OUTER MIRROR INSTALL HOLE COVER


    1. A00088HE04

      Engage the claw<A> as shown in the illustration.

    2. Engage the claw<B> as shown in the illustration.

    3. Install the outer mirror install hole cover with the screw.

    4. w/o Memory:


      1. Connect the connector.

  3. INSTALL OUTER MIRROR PROTECTOR


    1. A0005Z7E04
      Text in Illustration
      *a Reference Point

      Install a new outer mirror protector while aligning it to the reference points on the front door panel.

  4. INSTALL OUTER MIRROR CONTROL ECU ASSEMBLY (w/ Memory)

    Click here

  5. INSTALL FRONT DOOR INNER GLASS WEATHERSTRIP

    Click here

  6. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY

    Click here

  7. INSTALL FRONT DOOR NO. 1 STIFFENER CUSHION

    Click here

  8. INSTALL COURTESY LIGHT ASSEMBLY

    Click here

  9. INSTALL DOOR PULL HANDLE COVER

    Click here

  10. INSTALL MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver Side)

    Click here

  11. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger Side)

    Click here

  12. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG

    Click here

  13. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  14. INSTALL LUGGAGE TRIM SERVICE HOLE COVER

    Click here

  15. INITIALIZE POWER WINDOW CONTROL SYSTEM

    Click here

  16. INSPECT POWER WINDOW OPERATION

    Click here