FUEL LID OPENER MOTOR ASSEMBLY INSTALLATION

Click here

PROCEDURE

1. Click here

   INSTALL FUEL LID LOCK WITH MOTOR ASSEMBLY

   
   

   1. Connect the connector.

   2. Engage the clamp.

   3. Install the fuel lid lock withe motor assembly with the nut.

      5.5 N*m

      56 kgf*cm

      49 in.*lbf

   4. Engage the 2 claws.

2. Click here

   INSTALL LUGGAGE COMPARTMENT INNER TRIM COVER LH

   Click here

3. Click here

   INSTALL ROPE HOOK

   Click here

4. Click here

   INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY (for LH Side)

   Click here

5. Click here

   INSTALL LUGGAGE COMPARTMENT FRONT TRIM COVER

   Click here

6. Click here

   INSTALL REAR FLOOR FINISH PLATE

   Click here

7. Click here

   INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY (for Rear Side)

   Click here

8. Click here

   INSTALL SPARE WHEEL COVER PAD RH

   Click here

9. Click here

   INSTALL SPARE WHEEL COVER PAD LH

   Click here

10. Click here

    INSTALL LUGGAGE COMPARTMENT FLOOR MAT

    Click here