TRUNK LID ACTUATOR INSTALLATION

PROCEDURE

1. INSTALL LUGGAGE CLOSER MOTOR ASSEMBLY

   
   

   1. Engage the 2 guides.

   2. Install the luggage closer motor assembly with the 3 bolts.

      Torque:

      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

   3. Install the nut.

      Torque:

      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

   4. Engage the clamp.

   5. Connect the connector.

2. INSTALL LUGGAGE COMPARTMENT DOOR HINGE COVER RH

   Click here

3. INSTALL LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY RH

   
   

   1. Engage the 3 clips.

   2. engage the 2 claws to install the luggage compartment trim cover assembly RH

4. INSTALL LUGGAGE COMPARTMENT INNER TRIM COVER RH

   Click here

5. INSTALL ROPE HOOK

   Click here

6. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY (for RH Side)

   Click here

7. INSTALL LUGGAGE COMPARTMENT FRONT TRIM COVER

   Click here

8. INSTALL REAR FLOOR FINISH PLATE

   Click here

9. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY (for Rear Side)

   Click here

10. INSTALL SPARE WHEEL COVER PAD RH

    Click here

11. INSTALL SPARE WHEEL COVER PAD LH

    Click here

12. INSTALL LUGGAGE COMPARTMENT FLOOR MAT

    Click here

13. INSTALL LUGGAGE COMPARTMENT DOOR COVER

    Click here

14. INSTALL LUGGAGE COMPARTMENT DOOR ASSIST GRIP

    Click here

15. INSTALL LUGGAGE COMPARTMENT DOOR INSIDE HANDLE

    Click here

16. INSTALL LUGGAGE LOCK CONTROL CABLE PLATE

    Click here

17. INITIALIZE POWER TRUNK LID SYSTEM

    Click here

18. INSPECT POWER TRUNK LID OPERATION

    Click here