TRUNK LID ACTUATOR INSTALLATION

Click here

PROCEDURE

1. Click here

   INSTALL LUGGAGE CLOSER MOTOR ASSEMBLY

   
   

   1. Engage the 2 guides.

   2. Install the luggage closer motor assembly with the 3 bolts.

      5.5 N*m

      56 kgf*cm

      49 in.*lbf

   3. Install the nut.

      5.5 N*m

      56 kgf*cm

      49 in.*lbf

   4. Engage the clamp.

   5. Connect the connector.

2. Click here

   INSTALL LUGGAGE COMPARTMENT DOOR HINGE COVER RH

   Click here

3. Click here

   INSTALL LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY RH

   
   

   1. Engage the 3 clips.

   2. engage the 2 claws to install the luggage compartment trim cover assembly RH

4. Click here

   INSTALL LUGGAGE COMPARTMENT INNER TRIM COVER RH

   Click here

5. Click here

   INSTALL ROPE HOOK

   Click here

6. Click here

   INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY (for RH Side)

   Click here

7. Click here

   INSTALL LUGGAGE COMPARTMENT FRONT TRIM COVER

   Click here

8. Click here

   INSTALL REAR FLOOR FINISH PLATE

   Click here

9. Click here

   INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY (for Rear Side)

   Click here

10. Click here

    INSTALL SPARE WHEEL COVER PAD RH

    Click here

11. Click here

    INSTALL SPARE WHEEL COVER PAD LH

    Click here

12. Click here

    INSTALL LUGGAGE COMPARTMENT FLOOR MAT

    Click here

13. Click here

    INSTALL LUGGAGE COMPARTMENT DOOR COVER

    Click here

14. Click here

    INSTALL LUGGAGE COMPARTMENT DOOR ASSIST GRIP

    Click here

15. Click here

    INITIALIZE POWER TRUNK LID SYSTEM

    (Click here)

16. Click here

    INSPECT POWER TRUNK LID OPERATION

    (Click here)