Click here

HOOD LOCK CONTROL CABLE ASSEMBLY INSTALLATION

Click here
Click here

PROCEDURE


  1. Click here

    INSTALL HOOD LOCK CONTROL CABLE ASSEMBLY (for LHD)


    1. Pass the hood lock control cable assembly into the cabin.

    2. Pass the cable through the upper radiator support.

    3. Engage the hood cable grommet.

    4. Engage the 5 clamps to install the hood lock control cable assembly.

  2. Click here

    INSTALL HOOD LOCK CONTROL CABLE ASSEMBLY (for RHD)


    1. Pass the hood lock control cable assembly into the cabin.

    2. Pass the cable through the upper radiator support.

    3. Engage the hood cable grommet.

    4. Engage the 4 clamps to install the hood lock control cable assembly.

  3. Click here

    INSTALL HOOD LOCK ASSEMBLY


    1. for LHD:


      1. A01W2X7

        Apply MP grease to the sliding areas of the lock.

    2. for RHD:


      1. A01W5KM

        Apply MP grease to the sliding areas of the lock.

    3. Connect the hood lock control cable assembly.

    4. Install the hood lock assembly with the 3 bolts.

      8.0 N*m 82 kgf*cm 71 in.*lbf

    5. Engage the clamp.

    6. Connect the connector.

  4. Click here

    INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY


    1. Connect the hood lock control cable assembly and install the hood lock control lever sub-assembly.

  5. Click here

    CONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

    Click here

  6. Click here

    INSTALL COWL SIDE TRIM BOARD LH (for LHD)

    Click here

  7. Click here

    INSTALL FRONT DOOR SCUFF PLATE LH (for LHD)

    Click here

  8. Click here

    INSTALL COWL SIDE TRIM BOARD RH (for RHD)

    Tip:

    Use the same procedure as for the LH side (Click here).

  9. Click here

    INSTALL FRONT DOOR SCUFF PLATE RH (for RHD)

    Tip:

    Use the same procedure as for the LH side (Click here).

  10. Click here

    INSTALL FRONT FENDER LINER LH (for LHD)

    Tip:

    Use the same procedure as for the RH side (Click here).

  11. Click here

    INSTALL FRONT WHEEL OPENING EXTENSION PAD LH (for LHD)

    Tip:

    Use the same procedure as for the RH side (Click here).

  12. Click here

    INSTALL FRONT WHEEL LH (for LHD)

    Click here

  13. Click here

    INSTALL FRONT FENDER LINER RH (for RHD)

    Click here

  14. Click here

    INSTALL FRONT WHEEL OPENING EXTENSION PAD RH (for RHD)

    Click here

  15. Click here

    INSTALL FRONT WHEEL RH (for RHD)

    Click here

  16. Click here

    INSTALL COOL AIR INTAKE DUCT SEAL

    Click here

  17. Click here

    ADJUST HOOD SUB-ASSEMBLY

    (Click here)