Click here

POWER TRUNK LID SYSTEM, Diagnostic DTC:B2222, B2225

Click here
Click here
DTC Code DTC Name
B2222 PBD Pulse Sensor Malfunction
B2225 Back Door Motor Clutch Malfunction
Click here

DESCRIPTION

DTC B2222 is output in the following situations: 1) When the pulse sensor of the luggage closer motor assembly has a malfunction and a normal waveform is not input into the pulse sensor during the power trunk lid operation, or 2) when there is a malfunction in the power trunk opener and closer activation power supply.

DTC Code DTC Detection Condition Trouble Area
B2222 Pulse sensor of luggage closer motor assembly has a malfunction or the activation power supply has malfunction

  • Harness or connector

  • Luggage closer motor assembly
B2225 Clutch of luggage closer motor assembly has a malfunction or the activation power supply has malfunction
Click here

WIRING DIAGRAM

Refer to the "System Diagram" (Click here).

Click here

CAUTION / NOTICE / HINT

Note:

Inspect the fuses for circuits related to this system before performing the following inspection procedure.

Click here

PROCEDURE


  1. Click here

    CLEAR DTC


    1. Clear the DTCs (Click here).


  2. Click here

    CHECK FOR DTC


    1. Check for DTCs (Click here).

      OK
      DTC B2222 or B2225 is not output.

  3. Click here

    CHECK HARNESS AND CONNECTOR (LUGGAGE CLOSER MOTOR ASSEMBLY - AUXILIARY BATTERY)


    1. A0005XJE01

      Disconnect the U16 luggage closer motor assembly connector.

    2. Measure the voltage according to the value(s) in the table below.

      Standard Voltage
      Tester Connection Condition Specified Condition
      U16-12 (B) - Body ground power switch off 11 to 14 V
      Table 1. Text in Illustration
      *a

      Front view of wire harness connector

      (to Luggage Closer Motor Assembly)

    • OK

      REPLACE LUGGAGE CLOSER MOTOR ASSEMBLY (Click here)

    • NG

      REPAIR OR REPLACE HARNESS OR CONNECTOR