Click here

SLIDING ROOF HOUSING REMOVAL

Click here
Click here

PROCEDURE


  1. Click here

    REMOVE ROOF HEADLINING ASSEMBLY

    (Click here)

  2. Click here

    REMOVE SLIDING ROOF SIDE GARNISH LH


    1. A01W43F

      Disengage the 2 claws and remove the sliding roof side garnish LH.

  3. Click here

    REMOVE SLIDING ROOF SIDE GARNISH RH

    Tip:

    Use the same procedure as for the LH side.

  4. Click here

    REMOVE SLIDING ROOF GLASS SUB-ASSEMBLY


    1. A01W32N

      Using a T25 "TORX" socket wrench, remove the 4 screws and sliding roof glass sub-assembly.

      Note:

      To prevent the sliding roof glass and sliding roof drive gear from being displaced, fully close the sliding roof glass (sliding roof drive cable), and then remove the sliding roof glass sub-assembly.

  5. Click here

    REMOVE SLIDING ROOF WEATHERSTRIP


    1. Remove the sliding roof weatherstrip from the sliding roof panel sub-assembly.

  6. Click here

    REMOVE CURTAIN SHIELD AIRBAG ASSEMBLY LH

    (Click here)

  7. Click here

    REMOVE CURTAIN SHIELD AIRBAG ASSEMBLY RH

    Tip:

    Use the same procedure as for the LH side.

  8. Click here

    REMOVE SLIDING ROOF HOUSING SUB-ASSEMBLY


    1. A01W35U

      Expand the clip and disconnect the sliding roof drain hose.

      Tip:

      Use the same procedure for the other 3 sliding roof drain hoses.

    2. A01W21W

      Disengage the 2 clamps.

    3. Remove the 8 bolts, 8 nuts and sliding roof housing sub-assembly.