SLIDING ROOF HOUSING REMOVAL

PROCEDURE

1. Click here

   REMOVE ROOF HEADLINING ASSEMBLY

   (Click here)

2. Click here

   REMOVE SLIDING ROOF SIDE GARNISH LH

   
   
   1. 

      Disengage the 2 claws and remove the sliding roof side garnish LH.

3. Click here

   REMOVE SLIDING ROOF SIDE GARNISH RH

   Tip:

   Use the same procedure as for the LH side.

4. Click here

   REMOVE SLIDING ROOF GLASS SUB-ASSEMBLY

   
   
   1. 

      Using a T25 "TORX" socket wrench, remove the 4 screws and sliding roof glass sub-assembly.

      Note:

      To prevent the sliding roof glass and sliding roof drive gear from being displaced, fully close the sliding roof glass (sliding roof drive cable), and then remove the sliding roof glass sub-assembly.

5. Click here

   REMOVE SLIDING ROOF WEATHERSTRIP

   
   

   1. Remove the sliding roof weatherstrip from the sliding roof panel sub-assembly.

6. Click here

   REMOVE CURTAIN SHIELD AIRBAG ASSEMBLY LH

   Click here

7. Click here

   REMOVE CURTAIN SHIELD AIRBAG ASSEMBLY RH

   Tip:

   Use the same procedure as for the LH side.

8. Click here

   REMOVE SLIDING ROOF HOUSING SUB-ASSEMBLY

   
   
   1. 

      Expand the clip and disconnect the sliding roof drain hose.

      Tip:

      Use the same procedure for the other 3 sliding roof drain hoses.

   2. 

      Disengage the 2 clamps.

   3. Remove the 8 bolts, 8 nuts and sliding roof housing sub-assembly.