CHECK AIR CONDITIONING AMPLIFIER ASSEMBLY
Disconnect the H54 air conditioning amplifier assembly connector.
Measure the voltage and resistance according to the value(s) in the table below.
Tech Tips
Measure the values on the wire harness side with connector disconnected.
| Tester Connection | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| H54-1 (IG+) - H54-14 (GND) | V - W-B | Power source (IG) | Power switch on (IG) | 11 to 14 V |
| H54-1 (IG+) - H54-14 (GND) | V - W-B | Power source (IG) | Power switch off | Below 1 V |
| H54-21 (B) - H54-14 (GND) | GR - W-B | Auxiliary battery power supply | Power switch off | 11 to 14 V |
| H54-14 (GND) - Body ground | W-B - Body ground | Ground | Always | Below 1 Ω |
If the result is not as specified, there may be a malfunction in the wire harness.
Reconnect the H54 air conditioning amplifier assembly connector.
Measure the voltage and check for pulses according to the value(s) in the table below.
| Tester Connection | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| H54-38 (RDFG) - H54-14 (GND) | G - W-B | Rear window defogger signal | Power switch on (IG), rear window defogger switch off | 11 to 14 V |
| H54-38 (RDFG) - H54-14 (GND) | G - W-B | Rear window defogger signal | Power switch on (IG), rear window defogger switch on | Below 2.2 V |
If the result is not as specified, the air conditioning amplifier assembly may have a malfunction.
CHECK RADIO RECEIVER ASSEMBLY (w/ Navigation System) Click here
CHECK RADIO RECEIVER ASSEMBLY (w/o Navigation System for 8 Speakers) Click here
CHECK RADIO RECEIVER ASSEMBLY (w/o Navigation System except 8 Speakers) Click here