POWER WINDOW REGULATOR MOTOR(for Rear Door) REMOVAL

CAUTION / NOTICE / HINT

PROCEDURE

1. PRECAUTION

   Note

   After turning the power switch off, waiting time may be required before disconnecting the cable from the auxiliary battery negative (-) terminal. Therefore, make sure to read the disconnecting the cable from the auxiliary battery negative (-) terminal notices before proceeding with work Click here.

2. REMOVE LUGGAGE TRIM SERVICE HOLE COVER

   Click here

3. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

4. REMOVE REAR DOOR INSIDE HANDLE BEZEL PLUG

   Click here

5. REMOVE REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH REAR DOOR ARMREST BASE PANEL

   Click here

6. REMOVE DOOR PULL HANDLE COVER

   Click here

7. REMOVE REAR DOOR NO. 1 STIFFENER CUSHION

   Click here

8. REMOVE COURTESY LIGHT ASSEMBLY

   Click here

9. REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY

   Click here

10. REMOVE REAR DOOR INNER GLASS WEATHERSTRIP

    Click here

11. REMOVE REAR SIDE CURTAIN ASSEMBLY (w/ Rear Door Sunshade)

    Click here

12. REMOVE REAR SPEAKER ASSEMBLY

    Click here

13. REMOVE REAR DOOR ARMREST SET BRACKET

    Click here

14. REMOVE REAR DOOR SERVICE HOLE COVER

    Click here

15. DISCONNECT REAR DOOR WEATHERSTRIP

    
    

    1. 

       Disconnect the upper part of the rear door weatherstrip as shown in the illustration.

16. REMOVE REAR DOOR GLASS RUN

    Click here

17. REMOVE REAR DOOR LOWER WINDOW FRAME SUB-ASSEMBLY

    Click here

18. REMOVE REAR DOOR QUARTER WINDOW GLASS

    
    

    1. 

       Remove the rear door quarter window glass with the rear door quarter window weatherstrip as shown in the illustration.

19. REMOVE REAR DOOR GLASS ASSEMBLY

    Click here

20. REMOVE REAR DOOR WINDOW REGULATOR ASSEMBLY

    Click here

21. REMOVE REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY

    Click here