POWER WINDOW REGULATOR MOTOR(for Front Door) INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. Click here

   PRECAUTION

   Note:

   After turning the power switch off, waiting time may be required before disconnecting the cable from the auxiliary battery negative (-) terminal. Therefore, make sure to read the disconnecting the cable from the auxiliary battery negative (-) terminal notices before proceeding with work (Click here).

2. Click here

   INSTALL FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY

   Click here

3. Click here

   INSTALL FRONT DOOR WINDOW REGULATOR ASSEMBLY

   Click here

4. Click here

   INSTALL FRONT DOOR GLASS SUB-ASSEMBLY

   Click here

5. Click here

   INSTALL FRONT DOOR SERVICE HOLE COVER

   Click here

6. Click here

   INSTALL FRONT DOOR ARMREST SET BRACKET

   Click here

7. Click here

   INSTALL FRONT NO. 1 SPEAKER ASSEMBLY

   Click here

8. Click here

   INSTALL FRONT DOOR INNER GLASS WEATHERSTRIP

   Click here

9. Click here

   INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY

   Click here

10. Click here

    INSTALL FRONT DOOR NO. 1 STIFFENER CUSHION

    Click here

11. Click here

    INSTALL COURTESY LIGHT ASSEMBLY

    Click here

12. Click here

    INSTALL DOOR PULL HANDLE COVER

    Click here

13. Click here

    INSTALL MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver Side)

    Click here

14. Click here

    INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger Side)

    Click here

15. Click here

    INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG

    Click here

16. Click here

    CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

17. Click here

    INITIALIZE POWER WINDOW CONTROL SYSTEM

    (Click here)

18. Click here

    INSPECT POWER WINDOW OPERATION

    (Click here)