Click here

REAR POWER WINDOW SWITCH INSPECTION

Click here
Click here

PROCEDURE


  1. Click here

    INSPECT REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY (for LH Door)


    1. A00053JE10

      Check the switch function.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        6 (UP) - 1 (GND) Auto up or up position Below 1 Ω
        7 (DOWN) - 1 (GND) Auto down or down position Below 1 Ω
        8 (AUTO) - 1 (GND) Auto up or auto down position Below 1 Ω
        6 (UP) - 1 (GND) Free 10 kΩ or higher
        7 (DOWN) - 1 (GND) Free 10 kΩ or higher
        8 (AUTO) - 1 (GND) Free 10 kΩ or higher
        Table 1. Text in Illustration
        *a

        Component without harness connected

        (Rear Power Window Regulator Switch Assembly (for LH Door))

        If the result is not as specified, replace the rear power window regulator switch assembly (for LH door).

    2. A00053JE11

      Check that the LED illuminates.


      1. Apply auxiliary battery voltage to the rear power window regulator switch assembly and check that the LED illuminates.

        OK
        Measurement Condition Specified Condition

        Auxiliary battery positive (+) → 4 (LED)

        Auxiliary battery negative (-) → 1 (GND)

        		 LED illuminates
        Table 2. Text in Illustration
        *a

        Component without harness connected

        (Rear Power Window Regulator Switch Assembly (for LH door))
        *b LED

        If the result is not as specified, replace the rear power window regulator switch assembly (for LH door).

  2. Click here

    INSPECT REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY (for RH Door)


    1. A00053JE10

      Check the switch function.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        6 (UP) - 1 (GND) Auto up or up position Below 1 Ω
        7 (DOWN) - 1 (GND) Auto down or down position Below 1 Ω
        8 (AUTO) - 1 (GND) Auto up or auto down position Below 1 Ω
        6 (UP) - 1 (GND) Free 10 kΩ or higher
        7 (DOWN) - 1 (GND) Free 10 kΩ or higher
        8 (AUTO) - 1 (GND) Free 10 kΩ or higher
        Table 3. Text in Illustration
        *a

        Component without harness connected

        (Rear Power Window Regulator Switch Assembly (for RH Door))

        If the result is not as specified, replace the rear power window regulator switch assembly (for RH door).

    2. A00053JE11

      Check that the LED illuminates.


      1. Apply auxiliary battery voltage to the rear power window regulator switch assembly and check that the LED illuminates.

        OK
        Measurement Condition Specified Condition

        Auxiliary battery positive (+) → 4 (LED)

        Auxiliary battery negative (-) → 1 (GND)

        		 LED illuminates
        Table 4. Text in Illustration
        *a

        Component without harness connected

        (Rear Power Window Regulator Switch Assembly (for RH Door))
        *b LED

        If the result is not as specified, replace the rear power window regulator switch assembly (for RH door).